Basic HTML Version
© 2014
38
Apply Primers to Chemically or Mechanically Etched Concrete
Flexible Broadcast Primer
• Penetrates, seals, and hardens a concrete surface.
• Bridges fine cracks to help prevent top coating cracks.
• Clear 2-part 100% solids epoxy... 1-to-1 mixing ratio.
• Must have epoxy or urethane coating applied over it.
• Use as primer under a seamless floor flood coat.
No. 8142-0803
... 2 GL Kit
80 Sq. Ft./Gal spread at 20 mils.
Conset
Epoxy Primer
Water-Based & VOC Compliant
• 2-Part Clear or Color Liquid Mixture.
• Apply to a clean dry or damp floor.
• Apply to Concrete, Wood, or Metal.
• Penetrates Deep Into Surface.
• Locks onto Floor & Holds Top Coat.
• 267 Sq. Ft./Gal. at 5-7 mils wet.
• Dry to Touch in 5 to 8 Hours.
No. 8142-01
.... 3 GL Kits
Clear
2 GL Kits
Colored
FIRST
COAT
Primer should always be applied
to a clean etched concrete floor.
Locks-in & bridges over
hairline surface cracks.
Impedo
Oil Stop Epoxy Primer
Prime CLEANED Concrete Saturated
With Petroleum-Based Oil or Grease
Not for floors saturated with animal
fat, vegetable oil, or synthetic oil.
•
Impedo
penetrates through petroleum
impacted concrete to lock inside the
concrete surface.
• 230 Sq. Ft./Gal at 7 mils wet.
• 2-Part System... 1-to-1 Mixing Ratio.
Impedo
requires that an Epoxy Sealer
or Coating be applied over it.
No. 8142-0709
... 2 GL Kit
Color: Black
• Self-priming for excellent bond.
• 267 Sq. Ft./Gal at 5-7 mils wet.
• Step-by-step instructions.
• May be finished off with a Permanent and/or
Provisional topping.
• Fast-drying & easy to apply with a ⅜” nap
roller or brush.
• May be applied to a damp surface.
• Meets all VOC standards.
BEFORE
AFTER
Self
Priming
Traffic Kote
–
Tough Odorless Epoxy Floor Coating
Shortens the Time It Takes to Install a Durable & Permanent Floor
Simplicity and Durability...
Gabriel research strives to keep our
Water-Base Coatings
at the forefront of floor
coating technology.
Etching is required.
Both products are self-priming—a separate primer is not required. When used
over existing well-bonded paint, urethane, or epoxy, the surface must be cleaned and well-abraded before application.
Benefits of using water-base coatings are:
Odorless • Easy Clean-Up • Reduced Drying Time
Water-Based Urethane
Clear Aliphatic Urethane
Odorless
Used Over
High-Build
Epoxy
• Two-component catalyzed urethane.
• Extremely fast set time and long pot life.
• Exceptional abrasion resistance.
• No offensive solvent odor emission.
• Wash well and abrade before recoating.
• 400-525 Sq. Ft./Gal at 3-4 mils wet.
No. 8142-06
... Packed in 1 or 5 GL Kits
Colors:
Clear
plus the following ...
White, Tile Red, Med. Gray, Light Gray, Beige,
Dark Gray, Brown, Light Blue, Blue, Tan, & Green
No. 8142-12
... Packed in 2 GL Kit
Two-Part System for Concrete, Wood, or Metal
Note: If a floor has an oil or grease residue after being thoroughly cleaned and etched,
you will need to use the Impedo Oil Stop Epoxy Primer System.
Primers That Ensure Bond of Top Coats
Self-Priming Industrial Coatings
Multiple Coats May Be Applied if Desired
